Manual valve body th400

View search for th4manual valve body and get Free Shipping on Orders Over $at Summit Racing! Street cruising the Camaro. It will let you shift manually or put the shifter into drive and the transmission remains full automatic. Reverse pattern, manual valve body.

The competition valve body was designed for maximum performance and quick elapsed times in racing and off-road applications. Vehicle specs: 3sbc with aluminum heads and MSD atomic efi. TCI Competition Manual Valve Bodies for maximum performance and quick elapsed times in racing applications. It was designed to prevent engine damage.

You can eliminate this feature by performing the following modifications to the valve body. Found within is a maze of various passages that directs fluid to its appropriate clutch or servo to provide a smooth shift. The aircraft grade aluminum is lighter than OEM steel versions, and the solid design is more rigid than the veined OEM design, improving strength.

Engineered to allow full manual control of the valve body , for quicker shift timing and higher line pressures. There is no automatic shifting. Can shift down to any gear from any rpm. PRO: Similar to the 1- but with ability to customize on installation (with diff springs, hole diameters, etc.) to make it softer and take out some harshness.

Full Manual Valve Body Learn More. To align the new valve body , install two guide pins into the transmission case. Install only one ¼” check ball in the transmission case as shown in (photo 3).

Leave out the remaining check balls. When installing the valve body make sure the shift lever detent is engaged with the manual valve. The last little bit of information i have to share with everyone on the th4is the full manual valve body.

Now you are ready to install your valve body. Install: Gasket, TCI Separator Plate, Gas-ket and TCI Manual Valve Body. Bolt the valve body to the transmis-sion. After you have started all the valve body bolts, tighten a few bolts and then remove the two guide pins and replace with the re-maining. I would rather see you install a shift improver kit and a BM govenor recallibration kit (it moves the shifts points to where you want to have the trans shift at WOT).

This reverse pattern full manual valvebody. This valve body allows transbrake application in both first and second gear ranges. Thrust Washer and Bearings Valve Body Chemicals and Lubricants. Technical TH3manual valve body help.

If you need any kind of technical help or assistance, please feel free to call us any time. The reverse valve body is set up in such a way, as to not let the driver over shift into neutral (or reverse) at the top end of the track. I do drive a full manual reverse valve body th4with a Quarter stick on a regular bases on the street.

If I were you I would leave the manual valve body alone, put a good shift kit in your regular valve body so you can drive it like a manual if you want or leave it in drive if you want.

The OEM manual valve is used with this valve body kit. The manual valve has an opening that the detent will fit Into. The detent lever moves the manual valve when you manually shift the vehicle. RTCC Lockup Wiring Diagram. TURBO 4FULL MANUAL VALVE BODY.

Format : PDF - Updated on March VALVE BODY DIAGRAM WORKSHOP MANUAL. TH4Valve Body Exploded View. They require no kick down or vacuum connections.

CHEETAH Pro Competition PRN3full manual Drag Race ONLY Valve Body was released for Torqueflite. Gm Turbo 4Th4Valve Body Assembly With Aluminum Piston. A) An automatic transmission manual valve body is a modified or aftermarket valve body which puts full control of when the transmission shifts in the drivers control.

Automatic transmissions normally shift, automatically, based on line pressures, vehicle spee vehicle load and other factors which the driver has no control over. Includes New Pressure Regulator valve , TCC Regulator valve and (6) Dampeners for Valve Body. With this coating added to the valve body you will wear out the manual valve before you wear out the valve body itself,” Seaver says. No engine braking in low or intermediate.

Please read and follow these instructions carefully. I have considered hooking up the downshift solenoid to a button on the shifter to kickdown on command. But, I also find it easy enough to shift it down a gear, blip the throttle like you would on a stick, and it works.

Can I drive my Th4reverse manual valve body on the street? Not like everyday commuting to work, but like on Friday and Saturday Nights downtown? Ive believe you can do damage, because there is a constant line pressure kept. Found another th4to rebuild and put a turbo action reverse manual valve body and that still works today (years later, granted i dont drive it as much) with a Art Carr convertor.

Warning any manual valve body will shift real hard and will chirp tires in all gears because of full line pressure at all times. If you plan on street driving with a manual valve body I suggest making sure the rest of the drive train is super strong. The added traction will tear up parts with the hard shift that comes from a manual valve body.

Or run some rock hard tires. If this is a dirt only truck than the tires will spin when shifting. If the valve body were working properly, this shift stick would not slip so easily like that. You may also notice that it is much slower for your transmission to go into reverse or drive when you change the gear. All these are signs of a failing valve body in your automatic transmission system.

Spicer yoke for wheel drive models. Has inch tailshaft and inch separation on top bellhousing bolts.

Transmission shipped without speedometer driven gear or housing.