Currie 9 inch rear end

Suspension brackets are in stock locations for easy bolt-on installation, and upper control arm urethane bushings are installed in the upper control arm brackets. There was a time long ago when you had to hit the junkyard if you needed the strength, reliability, and easy gear. Rear-End Housing Assemblies Compare Axle Assembly, Rear, 31-Spline, x 4. Find great deals on eBay for currie ford rear end. From raw materials to sitting on a pallet. See all for inch ford rear end.

Plus, you also add the necessary bearings, seals, and shims. The end result is a stout piece that uses all brand-new parts with nothing remanufactured or rebuilt. Strange Engineering has become a household word among racers and crew chiefs in the drag racing industry by developing an impressive line-up of innovative products that include rear axles, drag brakes, coil over shocks, coilover struts and ford inch and Dana complete rear end assemblies. Depending on the application, it can be off-center by a couple of inches or more. New housing with spline axles.

New Trac Loc posi third member. Moser offers a Stamped Heavy Duty - inch housing as well as a fabricated “M9” housing to replace the stock 8. Each Quick Performance rear end package is built to order. Order date to delivery date usually takes about 1. This is a short video of rear end case for the chevelle lsx project. This car will be show quality top to bottom. Check back weekly for more videos of this lsx monster build.

Complete MUSCLE PAK Rears (ready to install). Axles (Factory Applications) Axles (Custom made to order). After all, not only is the ″ hands down the most popular rear end choice in the history for racing and the aftermarket, but it is like that for a darn good reason – it’s strong as an ox.

Designed to be used as a front or rear end , this specially made diff will. The axle tubes are a sturdy three- inch diameter,. We are your number one authorized distributor of products from Moser Engineering, supplying Canadians with rear end components from the number one name in performance and reliability. All Prices are in Canadian Dollars.

This package pushes the GM A body to the max. The Ultimate rear end with the Ultimate arms. Upgrade to the full floating option to improve rear brake performance by. Refine your search for currie rear end.

Go with a name you can trust. These are the highest quality rear - end parts you will find. Starting at an open rear end , prices increase for different traction options.

Like the - inch , the 8- inch uses no carrier breaks, meaning you can put a 5. The factory installed a tag on the rear that would identify it. If the tag is missing look at the retainers that hold the diff. CHEVY FORD NINE INCH - $995.

Now, you probably have never seen this before, and that’s because it has never been available before, and we have the very first one. A ring gear and pinion installation, especially a high numeric ratio with new bearings, can cause an excessive heat build up in the rear end and cause softening of the gear teeth and bearings if a break-in is not performed. Ford Inch Third Members.

Rear Prerunner Series ″ Axle Housing. If you’re looking for a complete rear end , check out our online builder for options and pricing. Well weve finally had enough with that puddle of 90-weight gear oil puddled on the shop floor under our Starliners rear end. This housing can be used with all new Currie 3rd member, axles and brakes, or any 3rd. Currie high pinion rear , ready for installation.

Chris Bassett After going through an axle shaft, carrier, Gearless Locker, and two Ring and Pinion sets in my Dana 35c rear - end , I decided it was time for an upgrade. Yes, it looks quite ugly) This is the correct seal for our SMALL bearing inch or inch with spline axles. Rear End Housings, Axles and Center Sections. Description: Dana 4Rear Bolt In Jeep Wrangler CJ Axle Assembly Base Axle Includes: Brand New Dana 4Casting Bracketed with CJ Heavy Duty Brackets (1 USA Made) - Spline Chromoly. THE SRG EVOLUTION INDEPENDENT REAR SUSPENSION IS HERE!

Currie makes them any width you wan t, and they are not as expensive as you might think. This crate package features the -plus round back hot rod housing and 31-spline “ Currie axle” package that measures 56-inches from brake face to brake face. The rear end refers to the entire rear axle assembly.

The different parts of the rear end are the brakes, axles, axle housing, and the third member. ECONOMY INCH REAR END ANY WIDTH COMPLETE. Sign Me up for the RacingJunk Classifieds newsletter.

Are there anyone here that have done it and can it be done on a reasonable budget. I like the Strange rear end. I have a lot of friends that are running their S-60.

I think - inch I think Currie and. However, before final assembly, SO-CAL installs brackets for either leaf spring or coil-over suspension. If you have the suspension you will need to send your brackets in. This rear end never made it on the car much less on the roa so. Update your delivery location.

INCH CURRIE MOSER WORKSHOP REPAIR MANUAL.

I am using right stuff rear brake kit and Frank from Prodigy sent Moser some brackets from the kit so that everything would jive when I put it together. I hate the distinctive smooth end of the and the Currie Track- offered a unique look combined with the LPW aluminum rear cover. Currie is the only company I know of that offers a heavy duty tapered bearing for the.

This field is for validation purposes and should be left unchanged. G body axle for my Monte SS.