241 Transfer case

The part has normal wear from use, which might be seen from the product photos. It features an aluminum casing and is driven by a chain. Used on Chevy, GMC, and Dodge 4x. It was offered with both passenger- and driver-side front outputs. Typically a chain drive case is a bit quieter, but a gear drive case is most often stronger and does not suffer from chain.

The unit is remanufactured in our facility and comes with a 12-month, unlimited miles warranty within the contiguous United States. You will find a circular identification plate attached to the rear of the case , in the center. The NP241OR has a 4:low gear ratio acheived through planetary reduction.

Just make sure you run a skid plate under it. The 2is a pretty good case. It has earned a reputation as being reliably solid and a definite improvement over the NP2transfer case that it replaced.

My friend has a 700rtranny withh the 241c transfer case driver dorp.

Here is the NP241DHD transfer case. The RR for the LD transfer case should be very similar.

The link below will take you to the transfer case section for a 2nd gen Dodge Ram Truck. All 4WD vehicles use a transfer case to send transmission power to the front and rear axles. The NV2and 2are part time transfer cases with a low-range gear system. New Process 2(NP241) Housings.

They have three operating ranges plus a Neutral position. The low range (4L) position provides a gear reduction ratio of 2. My 2transfer case came out of a Rubicon, so there was no need for any special adapters. This transfer case has a very good reputation for durability and long life. Get it cheaper and shipped free here. Below find a parts illustration for theNP23 NP23 NP2and NP2transfer cases, utilized by Jeep, Dodge and Chevrolet.

Transfer Case Gen I NVG 2for Wrangler JK. You can identify this transfer case by its aluminum case kit and it is chain driven. WITH THE PROPER ADAPTER-Not Included.

Electrical connections at the transfer case. Support the transfer case with a jack. Bolts (122) and spring washers (123) (if used). New gasket (121) to the transmission. Use gasket sealer to hold it in place.

Has anyone replaced a NP 2with a different transfer case ? Fill Your Cart With Color Today! Having transfer case problems, need help finding parts? We offer transfer case rebuild kits, transfer case parts, and more to assist with your transfer case repair.

These quality transfer case parts and rebuild kits are designed to be top to of the line rebuild kits. Most of these units will be right hand drop, but Chevy also used a few left hand drop applications. People would not check their oil in the 2transfer case and it would burn out the bearings and gears. Their main downfall is the slip yoke rear output which is not desirable on lifted trucks.

This model is a mechanical or automatic shift design that features a slip rear yoke. All Dodge 271- 273- 2DHD transfer cases will be charged an additional 350. We will provide a prepaid shipping label to cover the expense of returning the core to us. Any transfer case that was built by New. Left Hand Drive Right or left hand drive.

Should this transfer case be sealed between the halves with silicone or anaerobic sealer? It is leaking between the halves and has silicone. Backed By Our Year Unlimited Warranty. Position the transfer case assembly on blocks with the input shaft facing downward. The brake is mounted within the transfer case motor assembly, and is controlled electronically by the TCCM.

This design is easy to install and easily adjusts to the tub. Use your existing t- case shifter. Another problem associated with the NP2transfer case is the snap ring on the rear. NP2seal and gasket (now with picture). All my real problems are on the transfer case.

In short, a transfer case is connected to the transmission, drive shafts, and front and rear axles in four-wheel drive and all-wheel-drive vehicles. This truck has a driver side drop transfer case and needs to be replaced with a passenger side drop transfer case. The truck has a SAS and has a GM front axle, therefore the need for a passenger side drop transfer case. Will it bolt to the adapter that is currently in the truck?

The Kit replaces the body mounted mechanical system with a robust cable actuated design that creates a crisp and carefree transfer case shifting experience. Whether you need a complete transfer case replacement, something a bit more heavy duty, or just a part to keep your current one happy, we carry an extensive list of transfer cases and parts for just about every make and model out there. Jeep finally listened to Jeep owners and the aftermarket, and gave the consumer the transfer case they have been building from the 231J for years.

Exploding your truck’s transfer case can really be a drag, whether you’re on the trail or just flat-towing your 4×down the road. Capacity Torque (Current Application) Weight lb. Need to find the RIGHT part for your car? Click the Part Lookup Guide button.

These cases are offered to owners of GM brand 4xvehicles using the 2builds for off-road functionality. Buy online, pick up in-store in minutes.