Power steering pulley removal tool

We know our parts and products. Showing selected.

See all for power steering pulley removal tool. Once this has been achieved and there is sufficient room in front of pump attach the removal tool by fitting the tool into position and using force to turn the press. CADILLAC NORTHSTAR WATER PUMP AND POWER STEERING PULLEY REMOVER AND.

Nice quality, Bought it to change power steering pump on an impala with the 3. There was not enough room to pull the pulley with the pump installed on the car with the tool. The bolt on tool was too long. This pulley remover set works on most domestic cars and light-duty trucks to remove pressed-on pulleys for alternators or power steering. Reversible split jaws get easy access to the pump pulley flange. They include a threaded bolt, a spacer nut, and an instruction manual.

Your order may be eligible for Ship to Home, and shipping is free on all online orders of $35. Here I show how to remove and install a pressed on power steering pump pulley. Once the power steering pump has been remove you can remove the old pulley. First, place the power steering pump in a vice on a work bench. It includes two screws for use on most For Chrysler, GM and VW power steering pulleys with Saginaw, Thompson, and Ford C1and Cpumps.

The Performance tool pulley puller and installer set works with most alternator and power steering pulleys. Fill Your Cart With Color Today! Contains all tools necessary for most power steering pump pulleys, including special adapters for GM Quad and 3. L modular engine pulleys. Kit includes all necessary installer adapters, puller assembly with thrust bearing, jaw and sleeve, and special GM power steering disconnect tool. Grab your power steering pump removal tool , and position the fingers onto the edge of the pulley with the correctly sized rod (if needed) installed to remove the pulley.

Keep turning the bolt until the pulley slides off the shaft. Sold by Nilima Online Stores. Step - Next, assemble the power steering pulley removal tool. The tool featured was made by stinger and was successful in removing the pulley with a hose clamp around the tool. Continue to tighten the tool until the pulley has been removed.

Using a power steering pulley removal tool , remove the PS pulley. Bottom of Photo: The installation tool included with the rebuilt power steering pump. To install the pulley I used a breaker bar to hold the jackscrew stationary, a wrench to turn the puller body and a wood dowel to hold the pulley from turning. Application(s) Use to remove and install pressed-on alternator- and power steering -pump pulleys on GM, For Chrysler, some AMC engines and most other domestic cars and light duty trucks.

A Second way to remove Power Steering pulley ? I was told i needed a Pulley removal tool but i really dont have any money until friday. Let me know of any tricks,tips. A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles. Safely remove or disconnect parts that will get in the way of the power steering pump. A siphon pump may be use or you can just disconnect the feed and return lines to drain the fluid into the pan.

Attach the pulley removal tool to the pulley. Guide the locking nut onto the. Place a drain pan under the power steering pump. Remove the power steering pump mounting bolts and the nut. Important: Cap or plug the ends of the power steering hoses to prevent fluid loss.

Disconnect the power steering hoses from the pump. Refer to Power Steering Hoses Replacement. Save on Power Steering Pulleys with great deals at Advance Auto Parts. Buy online, pick up in-store in minutes.

Align the Power Steering pulley to the other pulley assemblies on the vehicle. In the picture, a wood alignment tool is being used. The far end of the alignmnet tool rests on the crankshaft pulley , and the near end is on the power steering pulley.

Then attach a 10mm socket with ratchet to the end of the pulley removal tool , and attach a 10mm wrench to the nut of the pulley tool.

Tools and Shop Equipment. GearWrench is on the leading names in automotive repair tools. Almost any AutoZone store will have a power steering pump pulley remover for you to rent for free with a 1 refundable full-deposit. I personally wouldn't go and buy a rare tool like this that I may only need once every couple years.

Removing the Power Steering Pulley. Shop kd tools automotive power steering pump pulley kit in the specialty automotive tools section of Lowes. IMPORTaNT: Power steering pulley removal will differ greatly depending on the engine type. Therefore, the following steps give only a general overview on how a power steering pulley is remove using the Power Steering Pump Pulley Kit. How to replace Ford Focus power steering pump?

If the new pump doesnt come with a pulley , then you will need a power steering pulley removal tool to press off the pulley from the old pump and press on to the new pump. Step – Remove power steering pump pulley. Assemble the pulley removal tool on the front of the power steering pump pulley (Figure 2).

Removes power steering pulleys on most For Chrysler, VW, and GM vehicles with Saginaw, Thompson, and Ford Cand C1power steering. It should screw right into the shaft IIRC. Thanks for all the advise on the power steering pump pulley removal.

It’s like Rod Knox type I need to get the pulley off to gain access to the mounting bolts.