Thursday, February 9, 2017

How to replace fuel lines on a weed eater

Then drain the gas out of the tank. Do the same with the fuel line. If it has a fuel filter, replace it. Take the air cleaner element out and put a.

how to replace fuel lines on a weed eater

This was my first video and im sure the sound quality is poor. The rest should be better. If fuel is left sitting in the tank for large periods of time, it will cause the lines to harden faster. When working properly, this line sucks fuel up to the carburetor to keep the piston pumping.


Draw a diagram of where the fuel lines connect (or take a digital photo). Be sure to note on the drawing which is the small and which is the large line. Remove the fuel line from the carburetor with the hemostat forceps or long needle-nosed pliers.


Unfortunately, the fuel lines for most small gasoline engines are composed of these types of materials. While you are at it, you may want to replace the fuel filter as well. Even the most durable trimmer, however, may eventually experience gas line issues. Over time, plastic fuel lines.


I am not sure if I did it right.

how to replace fuel lines on a weed eater

I tried to duplicate the length of the hoses and I think I put on the right connection. Plastic fuel lines for small engines will eventually break. When this occurs, the fuel line must be replaced to avoid hazardous leaks.


In fact, the process takes less than one hour.

how to replace fuel lines on a weed eater

It may be a good idea to replace the internal fuel filter while you are replacing the line. Fortunately, replacing fuel lines in a string trimmer or other small power tool is not very difficult. Ethanol is a corn-based alternative fuel.


It’s cheaper and more stable (higher octane) than gasoline, but has a lower energy density. Similarly, reattach the spark plug wire. Now, reattach the fuel lines to the carburetor just like they were attached before. After having read the aforementioned points you must be able to replace the gas lines of the weed eater. As you pull the fuel lines off the weed eater trimmer, the fuel line filter which is small and cylindrical in shape will come off of that thin line that leads to the fuel tank.


Check the lines , clear any clogs you find and replace damaged fuel lines with the manufacturer-approved replacement part. You need to test your fuel lines and replace them to get your chainsaw back up and running. Each of the fuel lines are feet long.


How do I reconnect or replace the lines ? Please explain procedure for the small and the larger line. Replace the filter with the lines. SOURCE: cracked fuel lines PE5Edger Hi Dan, Yes, more than likely you will have to remove the screws on the back of the trimmer to remove the gas tank. Cookies help us deliver a better experience.


By using this site, you agree to our use of cookies. I ordered this product and when it arrive it was missing one of the lengths of fuel line. I searched Threading weed eater fuel hose and came up with a site explaining the procedure. I contacted customer service and had the replacement in hand in just under a week. My weed eater has two fuel lines coming out of the bottom of the tank, where as the new BL1weedeaters only have one line from the tank.


Is there any way to adapt my weedeater to a one line. A new tank and lines cost $34. I can buy a new one, a BL1for $99. I need to understand the arrangement for the fuel lines. Any help would be appreciated.


Hi Robin, This is a common issue with most trimmers. Please find a link below for a video how to guide on how to replace the fuel lines and filter. What is the fuel line routing on a ryobi 700r weed wacker? OEM parts for a quick and easy repair and instructional videos to help you install them. Ryobi sscarburetor adjustment.


Weedeater starts but dies. I added the basic fuel line diagram from that previous answer in the image below. Fuel line repair and replace. Troy bilt straight shaft gasoline string trimmer ace hardware.


If your Featherlite weed eater is old or stored improperly, you may need to replace the fuel line. Amazoncom huri carburetor with gasket fuel line primer bulb fuel. All gasoline engines have a fuel filter on the end of the fuel line in the fuel tank. Pull the filter from the tank through the gas tank opening and remove it from the line, 3. Drain the fuel from the unit, 2. Install the new filter on the fuel line and drop back in. String trimmer fuel leak ( simple fix).


FIX it but accidentally reversed the fuel lines so.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.

Popular Posts