48Re governor pressure sensor

GOVERNOR PRESSURE SOLENOID SENSOR KIT 46RE 47RE 48RE. X New Governor Pressure Sensor (Transducer).

Getting to Know the 42- 48RE Series Transmissions part Governor Pressure Signal 5V Reference Ground Temperature Signal Governor Transducer Transmission Oil Temperature Sensor 1. If the pressure isn’t right for vehicle spee look for a prob-lem with the speed. The new one I got at the dealer parts counter looks like the mopar solenoid pictured above with the black connector. I paid $2for a governor pressure solenoid and governor pressure sensor. This kit was specifically designed to improve the reliability of the governor solenoid in normal use and to handle higher base pressure in high performance application.

This unit will fit both early and late style. Compare these three measure-ments: 1. Install a gauge in the governor pressure port. Guys here seem to favor the GM solenoid and transducer for the dodge and the superior shift kit over the translogic. Chrysler Corporation 46RH, 47RH, 46RE, 47RE and 48RE.

The Borg Warner solenoid included in this item is the upgraded style governor pressure solenoi so it will be larger then the OE solenoid you remove from your transmission. AUTOMATIC TRANSMISSION - 48RE DESCRIPTION The 48RE (Fig. 1) is a four speed fully automatic transmissions with an electronic governor.

Related Products 68RFE Red Eagle clutch and Kolene steel master kit with second and forth clutch power packs. Although the high- pressure version that we are currently using has been performing much better than the original, these still fail occasionally. That sure fixed the shuttle shift problem, but now I have a delayed 2-shift when accelerating.

Also a New Oem Governor Pressure Transducer is included.

RE Dodge Diesel Shift Correction. This item wires into the computer harness and prevents the computer from throwing your automatic transmission into limp mode with higher pressure valve bodies. When a high- pressure valve body is installed in a truck, the higher governor pressure is detected by the computer and the transmission is put into limp mode to protect it. Governor pressure sensor delivers an output signal to the PCM indicating the output pressure of governor pressure solenoid.

The PCM uses this signal to control governor pressure. Governor Pressure sensor and the Output shaft speed sensor : Both these sensors are a known common problem with this transmission. A failure of either one will cause all sort of problems with the 48RE. Check if this part fits your vehicle.

When i pull out of my yar it goes in reverse fine. When i stop to switch to drive, it almost stalls but a few secounds and it picks back up.

On the roa as I accelerate it will shift up, but at some points it will shift back down and the rpms will jump. I bought a complete kit from Cascade to replace all the sensors and solenoids in my Dodge 47RE transmission about a year ago, Transmission never did work right. I bought the billet update for the governor pressure solenoid and a new governor pressure sensor was part of the kit.

Modified TV pressure and pressure curve. Governor pressure circuit relief valve (prevents transducer blowout due to high line pressure ) o Pressure regulator buffer circuit (reduces rapid regulator valve oscillation and pressure fluctuation) o Full time lube modification. RE 4WD COMPETITION TRANSMISSION. When even modest attempts of increased apply pressure occur, these bands.

The transfer plate is designed to supply transmission line pressure to the governor pressure solenoid valve and to return governor pressure. The governor pressure sensor measures output pressure of the governor pressure solenoid valve. Diagnostic Procedure Using scan tool, read DTCs. A lot of VB builds increase the governor pressure to control shifting, or, the build creates a bleed over pressure from high line pressures. L Cummins is an easy upgrade for your transmission.

This causes the failures at random intervals. They are equipped with a lock-up clutch in the torque converter. RE and 48RE transmissions are all four speed fully automatic units with an electronic governor.

Is this sensor causing my problem? If so, where is it located? Pictures are for reference only. The bran color and physical appearance of the part shipped might differ from the picture on the site. Company names, brand names, trademarks and logos are the property of their respective owners.

PATC Dodge 48RE Performance Transmissions. PATC builds 48RE performance transmissions in five levels. PATC is on the cutting edge of performance rear wheel drive American transmission development. We work with different manufacturers in the development of stronger parts.

Solenoid Kit quality assurance and price concessions. Easy to use parts catalog. Dodge Ram 48RE Automatic Transmission Upgrades and Cooling. This solenoid governor pressure will not flood out at increased line pressures. SONNAX FRONT SERVO PISTON COVER KIT.

In vehicles with A7(71-later), and 48RE transmissions it is common to have long slide 2-shifts, direct (front) clutch failure or poor line pressure. NEW OEM SNAP RING FOR THE FRONT PLANET TO OUTPUT SHAFT. THESE ARE THE KITS THE PROFESSIONALS USE. My understanding is this is the.

This is more prevelant on performance transmissions that run higher line pressures.