Manual valve body shifter

The competition valve body was designed for maximum performance and quick elapsed times in racing and off-road applications. Street cruising the Camaro. Reverse pattern, manual valve body. That trans is too fresh, and the car too light, to allow for a downshift into 1st at anything above mph, or it will lock up the rear. No electronics neede but you can keep the lock up converter if you choose too.

The transmission will have engine braking in 1st, 2nd and 3rd gears. STEP 14: Next install your BTE manual valve body. You must line up the manual valve with the detent lever of your transmission. The OEM manual valve is used with this valve body kit.

The manual valve has an opening that the detent will fit into. The detent lever moves the manual valve when you manually shift the vehicle. It will let you shift manually or put the shifter into drive and the transmission remains full automatic.

Get maximum performance and quicker ETs with these TCI full manual valve bodies. You get less clutch slippage under high loa so that more power gets to the ground. It is what they call a forward pattern valve body , which means that it goes P-R-N-3-2-with a switch for OD and another switch to lock up the torque converter. So this ratcheting BM shifter has got to go. Our full manual valve body always starts life as a 47RE Core.

We start the build with known good tested 47RE automatic core and modify them to run in full manual mode with a forward pattern ratchet shifter. Yes it will start off in second or third if you select them. It is manual for up-shifts and down-shifts too. View search for th4manual valve body and get Free Shipping on Orders Over $at Summit Racing!

FAST Shipping - Day Return. Manual Valve Body For GM TH350. Would appreciate advise on what to buy for rebuild guts, valve body , shifter ,torque convertor etc. Will be floor shifteclose to 6h.

Shift Kit: Makes your auto tranny do the exact same thing it does now, but better. If you are using the factory shifter they are not ideal for manually shifting. If going with an aftermarket manual shift valve body buy an aftermarket shifter if you do not have one already.

You will not miss any gears. I have a column shift SMR reverse manual valve body in my Super Bee 4Stroker. The car has so much torque I would rather shift away from neutral than shift into it. I would rather see you install a shift improver kit and a BM govenor recallibration kit (it moves the shifts points to where you want to have the trans shift at WOT). That being said operating a car with a full manual valve body on the street is an exercise in restraint.

I think the issue with the stock shifter and a manual valve body is the lack of detents in the pattern as you are going up through the gears. Found another th4to rebuild and put a turbo action reverse manual valve body and that still works today (years later, granted i dont drive it as much) with a Art Carr convertor. Warning any manual valve body will shift real hard and will chirp tires in all gears because of full line pressure at all times. How to build a bombproof GM 4L80E automatic transmission with a full manual valvebody and lockup torque converter. STEP Install Valve Body into Transmission: When reinstalling the valve body , it is very important that the internal linkage engages the valve body properly.

Engage selector lever (control rod) into manual selector valve of valve body. The reverse valve body is set up in such a way, as to not let the driver over shift into neutral (or reverse) at the top end of the track. With a full manual you will have to make every shift , these units are not built to shift on their own.

Our competition valve body for maximum performance and quick elapsed times in a racing application.

By controlling the valve body only through manual means we can produce quicker shift timing and are able to run higher line pressures than possible with an automatic shift transmission. The valves that make up the valve body each serve a different purpose and their names reflect what they do. Depending on which gear is selecte the manual valve feeds hydraulic circuits that cause certain gear ratios.

For instance, if the shift lever is in third gear, it feeds a circuit that shifts from 1st to second to third gear, yet prevents overdrive from engaging. Fill Your Cart With Color today! A) An automatic transmission manual valve body is a modified or aftermarket valve body which puts full control of when the transmission shifts in the drivers control. Automatic transmissions normally shift , automatically, based on line pressures, vehicle spee vehicle load and other factors which the driver has no control over.

If you have to go with a manual valve body then call Performance Automatic or Lentech. You can use a stock shifter. Designed with competition in min this valve body has completely re-engineered fluid circuits which provide the best shifts possible.

L80E Transmission valve body kits , Shift kit,Transgo shift kit,4L80E-HDTransgo performance shift kit. L80E Performance reprogramming kit manual shift. Valve Body : Install the valve body on to the case, being sure to insert the servo tube into the hole in the case and align the manual valve to the pin on the manual valve lever. Make sure groove in manual valve is indexed with pin selector range cam.

Engineered to allow full manual control of the valve body , for quicker shift timing and higher line pressures. A closeup of the manual shift valve (top) and the kickdown (bottom). Step-16: Note Detent An earlier Cvalve body with internal manual valve detent, which is quickly identifiable by the manual valve detents in the valve itself. Includes New Solenoid Regulator Valve and Lube Regulator valves with reusable tools for installation and to bore Valve body. BD-Power has modifie tuned and tested this valve body to provide optimum performance.

I need a new shifter for my reversed manuel valve body 727. The one I got, I need to use both hands to shift to N - R and P. Instructions on Turbo Action Products! On the other side - I do miss the know exactly what gear you are in at all times feeling of my old stick shift , and this can be replicated with a full manual valve body auto.

Available in full manual shift only, it is very quick and responsive. Because of its fixed line pressure, with this valve body the transmission is no longer succeptible to failure from incorrect TV cable adjustment ( TV cable NOT to be used with full manual models ).