Penny tire tread

When performing the penny tire test, remember not only to check each tire, but to check various places around each tire. Pay special attention to areas that look the most worn. Place a penny head first into several tread grooves across the tire. If you always see the top of Lincoln’s hea your treads are shallow and worn. If this is the case, your tires need to be replaced.

There are several popular ways to check your tire tread depth. One easy way is the penny test. Tire Tech: Measuring Tire Tread Depth with a Coin U. Check your tire tread depth today! Reach into your pocket and pull out your spare change.

Give the penny test a try—it only takes a few minutes—and find out if it’s the right time to replace your tires. Tires with low treads make hydroplaning on rain-soaked roads more likely and significantly reduce traction in snow. Penny test for tires – how to measure tread depth. You may have heard of the penny test for tire tread depth and wondered if it’s something a layperson can manage, and a reliable test and indication of tire tread depth.

You can substitute a tire tread depth gauge with a U. These grooves between tread blocks act as channels that divert water, snow, and other slick elements away from the tire to help you maintain traction on slippery surfaces. This indicates the amount of remaining tread. Regularly checking your tire tread depth can help you determine when it is time to replace your tires.

Heavily worn tread will prevent a tire from performing as designed and can lead to unsafe driving conditions. How to measure your tire tread depth with a penny. A “rib” refers to the raised portion of tread that spans the circumference of your tire. Use the penny test to see if your tires are worn down and need to be replaced. Tire tread is composed of several ribs.

Take a penny , and place it upside down into several tread grooves on a tire. A penny test will tell you when your tires are bal but if you’re headed into winter or a rainy season, a tread depth gauge is the surest way to test. Or stop by your local tire shop to have a professional evaluate your tires. To check your tire tread , put a penny into any tread groove upside down so Abraham Lincoln’s head is inside the tread. If you can see all of Lincoln’s hea you may need to replace your tire.

For years many of us have been told that when testing our car tires thread to perform the penny test. Kent Wainscott goes to consumer reports headquarters to find out. Turn the penny head down and stick it between your tire tread.

Checking tire tread with a penny is one of the oldest and most reliable techniques for measuring tread depth.

You also can insert a penny into the tire tread —with Lincoln’s head upside down. To keep yourself safe, take your vehicle to a mechanic or dealer to quickly check the condition of your Yokohamas. Place the penny , with Lincoln’s head down and facing you, into the tread of the tire. If all or part of Lincoln’s head is obscured by the tread , you’re tires still have some life left – but if you can see all of Lincoln’s hea it’s time to replace your tire. It will tell you if the tread is too low and needs to be replaced.

Select a point on your tire where tread appears the lowest. Insert the edge of a penny into the most worn groove of the tire tread with Lincoln’s head down and facing you. The penny test can be used to check tire tread depth. Tire manufacturer Bridgestone says it’s important to check all of the vehicle’s tires and to place the penny at more than one spot on each tire to get an accurate reading. If you want to gauge your tire tread depth at home, try the penny tire test.

TREAD DEPTH: THE PENNY TEST. Stick a penny in the tire tread grooves. A tire tread depth chart displays information on the minimum tread allowed on usable tires. The charts are available online from companies such as Tire Information Center, which has information relating to anything that is tire specific, such as tread depth and rotations. To do it, take your penny and stick it into a random groove in one of your tires.

The Tire Rack is encouraging drivers to use a quarter instead of a penny. The easiest way to check tire depth is to take a penny and stick it between the tread with Lincoln’s head first. If the tread covers any part of Lincoln’s hea you should be good for the season.

At this tread depth, both dry and wet traction are greatly reduced. While a tire tread depth gauge is the best way to get an accurate measurement of remaining tread , a U. Lincoln penny can also be used to quickly approximate whether a tire needs to be replaced. A Penny or a Quarter for Safe Tire Tread Is Lincoln about to lose his head? Remember, using the Penny Test to check your tire tread depth is only a guide.

It will help give you an idea of when you should bring your car into an auto shop to check the tires and replace them. That is, of course, unless you are an awesome DIY mechanic type. Tread Depth and Tire Safety Your safety on the road rides on regular tire maintenance - literally.

At MPH, balding tires can increase average stopping distance by 1feet on wet roads. Before we dive into the Penny Test, though, let’s get a little background on tread wear and what it means for your tires. Tire Tread 1A tire ’s tread is the area around the circumference of the tire where (literally) the rubber meets the road. While finding a penny may not actually be a harbinger of good luck, a penny is indeed an effective tool to measure your tire tread depth. And importantly, the penny measurement allows you to determine with some certainty if you’ve reached minimum tread and it’s time to replace your tires.

Blowouts, tread separation, under inflation, and worn treads—the grooves in your tires that offer stability and traction—are some of the tire problems associated with these crashes. It’s an easy way to check your tire tread to determine if it’s time for new tires. Learn the Penny Test from Pep Boys. The Washington Quarter Test versus The Lincoln Penny Test.

That approach has been updated by the “new” Washington quarter test and accepted by many in the tire industry. There’s an easy way you can check their tread at home. All you need is a penny —really! This quick and simple method is called The Penny Test. If his entire forehead is covere you still have many miles left with your tires.

Best Answer: you put the penny in the grooves of the tread with the top of Lincolns head in the tread if all of his head sticks out your tire needs to be replaced. If your tire fails the penny test in any spot of the tire tread , you should immediately replace the tire. Consistent wear around the tire is normal.

Uneven tread wear is possibly a sign of improper inflation, incorrect alignment, or a shock, strut or suspension issue.