47Re governor pressure sensor

GOVERNOR PRESSURE SOLENOID SENSOR KIT 46RE 47RE 48RE. RE Governor Solenoid Borg. No wonder it’s starting in 3rd gear!

The problem can be hydraulic or electrical: Hydraulic — There may be a crossleak in the governor body or the governor solenoid itself. A loose or warped governor body is a common problem. You guys have definitely saved me a good bit of money and time vs. If the pressure isn’t right for vehicle spee look for a prob-lem with the speed. Well after confirming my suspicion I found that it was indeed the sensor I took a couple pictures and figured I would write up a how to for those.

This is extremely common in the 47RE and 46RE (44re and 42re could be as well). And it can be a number of things causing this as well! Chrysler Corporation 46RH, 47RH, 46RE, 47RE and 48RE. This kit was specifically designed to improve the reliability of the governor solenoid in normal use and to handle higher base pressure in high performance application.

This unit will fit both early and late style. Solenoid Upgrade Kit Dual Pack Solenoids Governor Pressure Speed Sensor Electronics Ships free, or upgrade to flat rate expedited 1-day shipping for $3. Shift: ~psi - Shift: ~psi - Shift: ~- 1psi (based on throttle position) - To replace the Governor Solenoid and Governor Solenoid Pressure Sensor , follow the steps below. Drain the tranny and remove the pan. Check if this part fits your vehicle.

This Transmission also comes all new internal electronics, Internal harness and main connector, new MOPAR Governor Pressure Solenoi new MOPAR Governor Pressure Sensor and New Overdrive Solenoi and New TCC Solenoid. I bought a complete kit from Cascade to replace all the sensors and solenoids in my Dodge 47RE transmission about a year ago, Transmission never did work right. I bought the billet update for the governor pressure solenoid and a new governor pressure sensor was part of the kit.

Also a New Oem Governor Pressure Transducer is included ( lower right corner ). When i pull out of my yar it goes in reverse fine.

When i stop to switch to drive, it almost stalls but a few secounds and it picks back up. On the roa as I accelerate it will shift up, but at some points it will shift back down and the rpms will jump. The most common cause of this is the output speed sensor. The governor pressure sensor and solenoid needs to be tested with a scan tool and a mechanical gauge hooked to the governor pressure test port.

Dodge Truck Transmission Solenoid Upgrade Kit 5. Related Products 68RFE Red Eagle clutch and Kolene steel master kit with second and forth clutch power packs. So I gave it my best reasonable guess and determined that it could be the governor pressure solenoid or the governor pressure sensor. They are equipped with a lock-up clutch in the torque converter. RE and 48RE transmissions are all four speed fully automatic units with an electronic governor. The Dodge 47RH and 47RE heavy-duty automatic transmissions.

This improved pressure curve will allow for much cleaner and crisper shifts, leading to longer life of your transmission components. The SunCoast 47RE HD custom valve body will provide your transmission with 1PSI with the torque converter locked in all forward gears, however can be ordered with higher if desired. Cummins Turbo-Diesel engines. Easy to use parts catalog. A lot of VB builds increase the governor pressure to control shifting, or, the build creates a bleed over pressure from high line pressures.

This causes the failures at random intervals. Metal pressure transducer Governor Body Gasket QTY: QTY: WHY USE THIS PRODUCT? The culprit is often the Governor Pressure Solenoid. One of the leading causes of transmission faults with the 47RE and 48RE Dodge transmissions is failed governor pressure transducers. The normal function of this solenoid is to generate a hydraulic pressure based on the road speed of the vehicle.

Image Size: Sort: Best Match Ending Newest Most Bids. Ten Pcs Transmission Governor Pressure Transducer 42re 44re 46re. New and Used Car and Truck Parts and Accessories On Sale.

PATC builds 47RE performance transmissions in five levels.

PATC is on the cutting edge of performance rear wheel drive American transmission development. We work with different manufacturers in the development of stronger parts. Automatic transmissions use mainline, governor , and throttle pressure valves to control and lubricate the transmission.

Some of these have been replaced or work together with electronic controls. Includes Rostra HD Governor Pressure Sensor This billet housing lets you upgrade the OE system with a GM epc solenoid for increase reliability. If your transmission has higher line pressure this kit is a must have.

Package Includes: 1Pcs 46RE Soleniod 1Pcs A5Governor Pressure Sensor Governor Pressure EPC solenoid kit, backed by year warranty. Brand new parts, ship from US. Please check the compatibility list before purchasing. There are dodge governor pressure sensor suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 1 of dodge governor pressure sensor respectively.

Dodge governor pressure sensor products are most popular in North America, Western Europe, and Southern Europe. Without testing the governor pressure (port is on the passenger side of the trans and is the last port before the OD section).