Automotive epoxy primer sealer

Automotive: primer sealer. When thinned , Eastwood epoxy primer makes a great sealer coat as well. When selecting the primer that best fits your painting process and end-use environment, keep all of the factors listed above in mind. Our primer paint works great over freshly sand blasted metal, body filler, on fiberglass, and will fill minor scores and surface imperfections. It can be sanded to desired smoothness.

By mixing them with an appropriate hardener, according to what it says on the label, you would apply the catalyst-type epoxy primers using a paint spray gun. Primer (Primer-Surfacer) Paint Sealer. Your order may be eligible for Ship to Home, and shipping is free on all online orders of $35. So the BIG QUESTION here is, will there be a big difference in final quality if I shoot paint over epoxy primer, vs. How to repair body panels with filler (bondo) and prep for paint.

The fender has already been. The most important distinction you need to understand is that a primer surfacer is intended to be sanded while a primer sealer is not. Surfacers are designed with fillers and pigments that make them easier to sand and powder when cured. VOC DTM may be recoated at any stage of cure. DTM can be topcoated within days air dry without sanding the DTM.

If the DTM is baked or air dried longer than days, it must be sanded with P400-P6before. Just abrade with sandpaper, apply your filler, sand flat, and feather the edges. Then you can apply more epoxy primer over top. This can’t be said for many primers! Use it for a final sealer -A cool trick we’ve been doing for the past few years is using our epoxy primer as a final sealer before our base coat.

Simply reduce it and lay. Great for after media blasting or paint stripping. Manufacturer of automotive coatings for the restoration, repair and custom markets. Why Southern Polyurethanes?

Has excellent corrosion protection. Available in gallons and quarts. A non-sanding, epoxy primer formulated for maximum adhesion and corrosion resistance.

Learn more about our exceptional products, color tools, and training programs. Not all epoxies are the same though. Epoxy primer on clean rust free metal on the bottom,helps hold out any.

We have compiled the most frequently asked questions about automotive undercoats. A two-component high solids, low VOC, HAPs free epoxy primer. The ready to spray VOC is less than 3. LV2is a versatile product that can be applied in a couple of methods: 1. As a wet on wet, non-sanded primer - sealer 2. This primer shows exceptional adhesion qualities and tremendous resistance to corrosion. It dries quickly and retains color much longer. This primer provides excellent adhesion to many types of properly prepared metal, fiberglass and aluminum substrates, as well as plastic fillers.

For collision repairs or spotting in a fender or door etc I never use epoxy primer as a sealer. The white makes a nice base as a sealer for bright colors like reds and. Seal as soon as possible with PPG DP-Sealer , primer using K-3 do your sanding and filling, another coat of K-then block and block some more. Finally reseal with DP-within hours of final paint or you will need to scuff the sealer with a Scotchbrite pad before paint.

Suggested Uses Can be applied over clean bare steel or aluminum and thoroughly sanded painted surfaces. Our rust-inhibitive metal primers offer fast dry and full cure times to maximize production without sacrificing quality. This unique, no-mess formula enhances the performance of any top coat in mild-to-severe environments.

Bonds to coated surface, improves top coat adhesion and sands smooth for the ultimate finish. This process produces automotive refinishing products that are consistent. PRIMER SURFACER PRIMER SURFACER 2K Epoxy Prime-N-Seal. VPColored Epoxy 999VPLV Colored Low VOC Epoxy. CPS- Black CPS- White CPS- Yellow CPS- Red CPS- Blue.

This epoxy primer is designed for use as a medium fill primer or may also be used as a sealer prior to topcoating. K (2K means part) epoxy primer is an outstanding choice for refinishing bare metal due to the excellent adhesion and corrosion resistance imparted from the anti-corrosive polymers in a typical 2K epoxy formulation. The proper mixing ratio is 2:1.

Two-component, penetrating epoxy primer sealer Product Characteristics.

EPOXY SOLVENT FREE Function. There are cases where primer surfacer has peeled from bare metal.

So, epoxy primer first, primer surfacer over that. The epoxy primer needs to vent solvents prior to spraying the primer surfacer. Then scuff the epoxy primer before applying the primer surfacer.

Read the can for full directions. Transtar manufactures one of the most extensive repair, refinish, and detail product lines for the automotive aftermarket. We offer only the highest-quality products that will save you time and money.

This blog talks about applying automotive primer , automotive epoxy primer and primer sealer. It provides three situations in automotive priming. WELCOME TO BASF AUTOMOTIVE REFINISH We Create Chemistry.

As the world’s largest chemical company, BASF is an unmatched expert in the science of color. How To: Spray primer sealer and base coat paint on an automobile. Spray epoxy primer to a repaired area of a car.

Canadian Tire offers a wide assortment of car primer paint. U-TECH technology provides refinishers with a VOC flexible, compact system that delivers excellent finish, good durability, and long lasting color at a competitive price. Recently re-engineere U-TECH uses the latest in resin and pigment technology compatible with all commercial industries.

VOC compliant, non-sanding, epoxy primer - sealer that is formulated for maximum adhesion and corrosion resistance.