Bilge paint

The constant exposure to harmful marine elements like heat, humidity, mildew, grease and grime requires a superior bilge barrier solution to resist moisture and repel most oils, acids, alkyds and solvents right on the spot. My concern is the epoxy is to hard and will crack with the movement of the fiberglass. I used this paint for the cockpit in my late 60s Oday Daysailer I. Since its an open cockpit single wall boat, the cockpit is also the bilge so I wanted a hard wearing paint that could take the water and the abuse. A protecting paint based on modified alkyd resin for use in bilge spaces, engine rooms, etc.

Can be applied over most substrates with one-component primer systems. Much, though not all, of the paint flaked off as we cleaned and degreased the bilge. Our goal is to have a bilge that is clean, as dry as possible, with the fiberglass protected from the effects of water. Quick Links: Recently Viewed. Epoxy-based paint for bilge , bulkhea and locker areas.

More colors with the Polyurethane. I am no paint guru just tryin to figure out a cost effective way to finish the bilge area. I dont just wanna spray paint it lol.

But from the back of the beack seats to the transom id like to coat it. A bilge paint formulated to resist dampness, oil, grease and prevent rot. Color is a matched to the original color used in classic Chris Crafts.

Bilge paint question - Offshoreonly. A deep rich red mahogany color. Good water and oil resistance for bilges and lockers. Not suitable for permanent immersion. Bilgekote helps prevent the absorption of oil, gasoline and sludge into wood and fiberglass.

COMPATIBILITY Bilgekote may be applied over any well-adhered paint. Do not apply Bilgekote directly over clear epoxy. Too much bilge paint and the inner hull starts to look sloppy, the paint seems to want to lie in the corners of the frames.

A water based bilge paint , ideal for all bilge areas, giving good resistance to oil, grease, salt water and fresh water. I am going to paint the bilge in my Vagabond (fiberglass) and was wondering if anybody would recommend a paint other than the bilge paints offered by Petit and Interlux. Redshift thats a good question and one im eager to hear answered.

Once you get the sitting oil out, and get to where there is just the fine film of oil residu you have to quit using the hose to wash it out. Lady Gets Her First Johnson Technique Adjustment At ACR LLC - Duration: 8:55. Im thinking it should as long as the surface is correct for the paint to stick to it and it should hold up well.

Shoot a video of you applying it. And all because you read WoodyBoater and saw this on EBAY! This project took us the better part of three days, between the extensive prep work required to rid the bilge area of dust from other boat projects and the multiple coats required to paint the bilge properly. If the bilge is clear coate this is easily seen and a repair can be done in a timely fashion. On the other hand if this same fastener is covered in paint , you will not notice anything until the surrounding wood has bubbled up the paint and now you have to repair a lot more then a poorly placed fastener.

Ok- fire away- surely it cannot be so easy as engine rated spray paint after a good degreasing and cleaning. Marine paints for other areas of boats and general infrastructure that also require maintenance from time to time. Smooth and anti-slip deck paint , bilge paint , boottopping, low friction coatings for ice breakers, surface tolerant epoxy for tidal zones.

This hard wearing finish is resistant to antifreeze, grease, gasoline, diesel fluid and engine oil. Rustoleum with added enamel gardener catalyst works fantastic and wears awesome. Way cheaper than anything labeled bilge or marine paint.

The paint left a semi gloss finish and seems to be very durable. I did not have any problems with the paint adhering to the epoxy or any other areas. Personally I am very pleased and for $ 75.

A wide variety of bilge paint options are available to you, such as free samples. There are bilge paint suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 1 of bilge paint respectively. So I will show him your blog as inspiration and encouragement! Wholesale Marine has a great selection of boat paint and marine paint that will keep your boat looking new.

Hull, deck, interior and bilge coatings for protection and aesthetics. Base for topcoat finishes. Stunning, durable boat and yacht varnish finishes and natural-looking tints. Products which have a button contain variables such as size or color and by clicking on the product image you will be able to view additional information as well as the options available for purchase.

Hi, I just got my first Roamer. First job will be to clean, scrape and paint the bilge. In the bilge , coat with CPES and a few coats of bilge paint. The use of bilge paint is recommended since it will allow moisture in the wood to evaporate out and prevent any fuel or oil from entering the wood. The use of epoxy paint in bilges is not recommend since moisture will be trapped in the wood.

When it comes to bilge paint it´s a complete mumbo-jumbo when trying to get to know which paint would be the best. Watch TotalBoat get put to the test as boats get built and projects come to life.