Picklex 20

Review from Kevin Tetz, the Host of the TV show “TRUCKS” on. Only one very thin coating needed (the product cost comes out to be 1 cents per sq.ft. of metal surface area). Since the coating is a conversion coating, no particle will come out to clog the fuel line. It prepares the metal surface for priming, painting or powder coating without the need for sanding or abrasive blasting of the surface.

No other ingredient in the product is hazardous or unsafe. Metal Prep question - P15-DForum - P15-D24. Replacing body mounts - P15-DForum.

It is a non-toxic bio friendly step metal rust prep, made in Huntsville Alabama. Click on Pictures for Details. Picklex gets sprayed straight from the bottle onto the metal.

What have you guys been using for you rust infested trucks after sandblasting or sanding. I noticed Picklex-is $a gallon and Metal Ready is aboug $a gallon. It might very well adhere with Picklex but then it might not so why chance it? Average rating: out of stars, based on reviews. Be the first to review this item!

You can also search for products using other keywords and item numbers. It acts as a metal surface cleaner, 1 rust converter, rust inhibitor, and protective coating. It removes mill oil, dust, surface rust, and white rust, while providing a conversion coating in treatment.

Scanning all available deals for Picklex shows that the average price across all deals is $21. Haband while the highest price is $39. The average discount we found across all deals is 51. Register Stovebolt.

Forums Active Threads Forum Help:. Please upgrade your browser or contact your System Administrator for. Wanted to make a post about this metal prep solution to see if anyone has used Picklex during their restoration and how it worked out. I am looking to treat some minor pitting and surface rust prior to priming and filling as well as protect portions of bare metalwork before the car goes to the.

Will picklex work if I plan to epoxy primer in the up coming months? From reading the instructions on the primer it says that the OSPHO stuff from what to use to protect metal from rust and future epoxy primer? Either way I will spray Zero Rust over it.

This domain is years old. I have Ospho and Picklex and actually prefer the Picklex for longer term protection. You clean the metal as best you can, then apply the Picklex.

Phosphoric Prep and Etch is rated 4. Yesterday I sandblasted one door and applied Picklex.

Today I went out to the shop and the face of the door looked goo almost a galvanized look to it. I turned it over and the inside was flash rusted. Picklex is for bare metal, Picklex is listed and shows a spec sheet for rusted metal. Just hoping to find someone who might have tried it.

I have tried POR 1 too expensive for the mess and toxicity. Hey guys, anybody know of a cheaper place to buy Picklex than the autobodystore. Ospho, Picklex , and many others are other similar products. And do I use the Picklex and epoxy primer on the engine block or something else. You must to continue.

About Low VOC Pre Paint Prep Aerosol oz.

Any question, call International Chemical products, Inc. Epoxy should be top coated during its recoat window. The owner of SPI paints says the best adhesion would be his primer on metal with bondo applied during the recoat window. Huntsville, Alabama, was voted the bronze winner for innovation in the Green Awards category.

The stuff I am referring to is used on clean, bare metal, not rusty metal. It will remove flash rust, but not what you are referring to, I believe. Canadian compressed air technology company handling all your industrial supply needs.

Located near Toronto, Ontario. Become a VIP member to access online-only offers. You will receive tips and tricks, information about new products and special events, and a code granting you access to exclusive VIP-only discounts. Can the primer be used over Picklex ? Hi All Some of you may be following my resto thread and picked up the fact that there is a brilliant product in the States called. So Grantshire you have tried the Picklex-?

Seemed expensive but if it does work then it might be just the thing to use between stripping a body panel and painting it. Picklex Application Instructions Manufacturer's FAQ If you should use the Picklex , when you get ready to prime and paint, be sure to observe the Do not use Self Etching Primer caution on the application instructions. I was wondering how well it worked.